 |
PTO Clutches
PTO clutches are easily identified by the factory Warner or Orgura part number located on the clutch face or mounting plate.
HANDY HINT: INSTALL MOUNTING BOLT AND RETAINING WASHER AND TORQUE TO SPEC.
Use Grade 5 or Grade 8 bolt only! Minimum Torque listed below:
7/16" UNF bolt is 50ft-lb / 67nm
3/8" UNF bolt is 31ft-lb / 42nm
M10 x 1.5 bolt is 35ft-lb / 48nm
WARNING! - Anything less than required mounting torque will result in clutch failure.